schematic maximum ratings parameter maximum dc v oltage +9 v olts continuous rf input power +17 dbm operating case t emperature C55 to +85 c storage t emperature C62 to +150 c r series burn-in t emperature +100 c thermal characteristics q jc 1 168/86 c/w active transistor power dissipation 1 0.13/0.53 w junction t emperature above case t emperature 1 22/46 c t ch max. 175 c note 1: v alues refer to stage 1 and stage 2 devices resp. weight: (typical) sm-381.3 grams rf out rf in v + thin-film cascadable amplifier 1000 to 4000 mhz t echnical data psa 4132 series features ? frequency range: 1000 to 4000 mhz ? high gain: 22 db (t yp) ? noise figure: 4.5 db (t yp) applications ? if/rf amplification ? input or driver stage ? instrumentation description the 4132 series is a two stage thin-film gaas fet rf amplifier for high gain and low noise applications up to 4000 mhz. low vswr is maintained by resistive feedback and inductive tuning while the rf is coupled through the amplifier by inter - nal blocking capacitors. the bias port is reverse polarity protected and bypassed with 6800 pf . pin configuration psasm-38 rf out rf in v + gnd
2 electrical specifications (measured in 50 w system @ +8 vdc nominal unless otherwise noted) t ypical guaranteed specifications symbol characteristic t c = 25 c t c = 0 to 50 c t c = C55 to +85 c unit bw frequency range .5C4.5 1.0C4.0 1.0C4.0 ghz gp small signal gain (min.) 22.0 20.0 19.0 db gain flatness (max.) 0.3 1.0 1.0 db nf noise figure (max.) 4.5* 5.5 6.5 db p 1db power output @ +1 db comp. (min.) +18.5 +17.0 +16.0 dbm input vswr (max.) 1.5:1 2.0:1 2.0:1 output vswr (max.) 1.5:1 2.0:1 2.0:1 ip 3 t wo tone 3rd order intercept point +29.0 dbm ip 2 t wo tone 2nd order intercept point +50.0 dbm hp 2 one tone 2nd harmonic intercept point +55.0 dbm i d dc current 150 ma * specification applies at f greater than 1.0 ghz, nf @ 500 mhz = 6 db typical. t ypical performance over t emperature (@ +8 vdc unless otherwise noted) key: +25 c +85 c C55 c 2 3 4 5 6 7 500 1500 2500 3500 4500 noise figure noise figure, db frequency, mhz 20 21 22 23 24 25 500 1500 2500 3500 4500 gain gain, db frequency, mhz 1 1.25 1.5 1.75 2 500 1500 2500 3500 4500 output vswr vswr frequency, mhz 1 1.25 1.5 1.75 2 500 1500 2500 3500 4500 input vswr vswr frequency, mhz 18 19 20 21 500 1500 2500 3500 4500 power output power output @ 1 db gain compression, dbm frequency, mhz 29 30 31 32 33 500 1500 2500 3500 4500 third-order intercept point ip 3 , dbm frequency, mhz 45 50 55 60 65 70 500 1500 2500 3500 4500 second-order intercept point ip 2 , dbm frequency, mhz 50 55 60 65 70 75 80 500 1500 2500 3500 4500 second-harmonic intercept point hp 2 , dbm frequency, mhz psa 4132 series
3 automatic network analyzer measurements (t ypical production unit @ 25 c ambient) sCparameters bias = 8.00 v olts freq s 11 s 21 s 12 s 22 gpdel phase mhz mag ang db ang db ang mag ang ns dev 250 0.62 C46.1 8.6 C171.9 C46.6 C138.7 0.71 C152.9 300 0.58 C66.8 15.9 167.8 C49.2 160.4 0.6 178.7 1.13 350 0.51 C86.5 19.4 143.8 C41.5 121.6 0.45 155.6 1.33 400 0.41 C102.2 21.1 126.2 C39.8 108.6 0.32 141.8 0.98 450 0.32 C114.4 21.8 111.1 C37.5 97.4 0.24 135.2 0.84 500 0.25 C125.3 22 102.7 C37.8 86.6 0.19 135.2 0.47 550 0.2 C135.8 22.2 95.9 C36.7 88.5 0.17 138.1 0.38 600 0.16 C145.6 22.2 91.7 C36.2 88.2 0.15 140.3 0.23 650 0.13 C156.2 22.1 89 C35.9 87.6 0.15 141.8 0.15 700 0.11 C170.1 22.1 87 C35.4 87.6 0.15 142.3 0.11 750 0.09 174.3 22.1 85.2 C35.3 90.3 0.15 143.1 0.1 800 0.08 156.7 22.1 85.3 C35.5 92 0.16 142.7 0.01 850 0.08 139.7 22.2 85.1 C35.5 93.5 0.16 140.9 0.01 900 0.08 122.1 22.2 85 C35.7 95.4 0.16 139.6 0.01 950 0.08 107.9 22.1 86.1 C35.4 97.6 0.17 137.1 0.06 1000 0.09 95.6 22.2 87.3 C35.2 99.3 0.17 136 0.07 4.5 1250 0.13 56.2 22.1 92.6 C35 113.8 0.18 126.3 0.06 C1 1500 0.15 30.9 22 100.8 C34.9 129.3 0.18 117.5 0.09 C3.7 1750 0.17 10.2 21.9 111.3 C35.2 146.3 0.19 110.8 0.12 C4 2000 0.18 C9.5 22.1 122 C35.3 165.2 0.19 106 0.12 C4.2 2250 0.17 C30.1 22.1 133.4 C35.2 177.1 0.18 103 0.13 C3.6 2500 0.17 C51.3 22.2 144.1 C35.3 C162.1 0.17 100.4 0.12 C3.8 2750 0.15 C68.3 22.2 154.2 C35.4 C145.1 0.18 94.7 0.11 C4.5 3000 0.12 C86.6 21.8 165.6 C35.3 C127.4 0.16 89.9 0.13 C4 3250 0.1 C102.3 21.8 178.8 C35.6 C112.8 0.15 84.5 0.15 C1.6 3500 0.06 C108.6 22.1 C168.3 C35.5 C97.3 0.14 76.4 0.14 0.4 3750 0.02 C94.8 22.2 C158.4 C35 C79.6 0.12 68.4 0.11 C0.5 4000 0.05 C18.8 22.3 C147.1 C34.7 C63.8 0.1 54.9 0.13 0 4250 0.11 C34.1 22.4 C137.8 C34.1 C52.8 0.07 32.1 0.1 4500 0.13 C65.8 22.7 C131.7 C34.5 C43.2 0.03 120.6 0.07 4750 0.14 C62.1 22.2 C124 C35.6 C24.9 0.09 95.6 0.09 5000 0.19 C79.6 22.3 C116.9 C35.1 C7.7 0.13 82.4 0.08 5250 0.23 C109.1 22.3 C111.1 C34.6 2.9 0.17 72.8 0.06 5500 0.26 C146.9 22.1 C110.2 C33.9 13.6 0.24 59.7 0.01 5750 0.28 165.5 21.1 C112 C34.1 22.3 0.32 40.9 0.02 6000 0.32 113.4 19.3 C113.2 C35 23.4 0.36 17.5 0.01 6250 0.37 65.9 16.9 C113.8 C36.8 29.3 0.36 C3.9 0.01 6500 0.45 28.2 13.4 C112.4 C38.5 36.9 0.32 C22.7 0.02 6750 0.52 C1.9 9 C107.7 C42.1 52 0.28 C39.6 0.05 7000 0.57 C25.3 4 C97.7 C46.2 51.2 0.23 C56.6 0.11 7250 0.61 C46.6 C3.5 C79.9 C43.1 94.3 0.19 C76 0.2 7500 0.63 C64.9 C15.7 8.9 C40.8 81.4 0.16 C95.1 0.99 7750 0.64 C81.1 C5.9 86.2 C37.7 37.6 0.14 C114.5 0.86 8000 0.66 C94.8 C1.8 106.8 C37.7 10.6 0.13 C128.5 0.23 lineariza tion range: 1.0 to 4.0 ghz psa 4132 series
product options case drawing sm-38 model number prefix
model number screening option
blank = no screening r = r-series screening psa 4132r 0.015 0.002 4 pl 0.040 0.160 max 0.370 sq 0.005 0.001 0.094 4 pl 0.102 4 pl 0.050 0.010 8 pl 0.030 3 pl c l 0.015 4 pl 0.048 4 pl 0.375 sq rf out rf in v + gnd 0.025 full radii 4 pl notes (unless otherwise specified): 1. maximum temperature exposure is 260 c for 10 seconds. 2. leads are for testing onl y and ma y be trimmed flush. 3. dimensions are specified in inches 4. t olerances: x xx .01 xxx .005
|
